Skip to Content

Publications

In this section, you will find the journal articles, conference proceedings and posters submitted to different competitions.

 

JOURNALS

  1. Jitendra Tate and Sagar Navle, “Feasibility Study of Thermoplastic Nanocomposites for ESD Applications Using Additive Manufacturing.” Nanotrends - A Journal of Nanotechnology & its Applications, STM Journals, accepted February 2022, Journal DOI no.: 10.37591/NTs , SJIF: 6.17
  2. Harish Kallagunta and Jitendra Tate, “Influence of Surface Functionalization of Ceramic Nanofibers on Morphological, Physical and Mechanical Properties of Unsaturated Polyester Nanocomposites”, Composites and Advanced Materials, Sage Journals, accepted February 2022, Impact Factor: 0.852
  3. Henderson, L., Zamora, S., Ahmed, T. N., Belduque Correa, M. C., Tate, J. S., Chen,

Y., & Geerts, W. J. (2021). Altering Magnetic Properties of Iron Filament PLA

Using Magnetic Field Assisted Additive Manufacturing (MFAAM). Journal of

Magnetism and Magnetic Materials, Vol 538, 15 Nov 2021, 168320. Published DOI: https://doi.org/10.1016/j.jmmm.2021.168320 , Impact Factor: 2.993

  1. Ryan M. McDermott, Jitendra S. Tate, and Joe Koo, “'Exploration of a New Affordable Thermal Protection System Utilizing 2.5D Silica/Polysiloxane Composite'”, J of Composite Materials, Sage Journals, published December 2021. DOI:  https://doi.org/10.1177/00219983211038622 , Impact Factor: 2.591  https://doi.org/10.1177/00219983211038622
  2. Jitendra S. Tate and Oluwasola K. Arigbabowo, “Additive Manufacturing of Polyamide Nanocomposites for Electrostatic Charge Dissipation Applications”, Journal of Materials Science and Engineering B, published June 2021.

DOI: https://doi.org/10.1016/j.mseb.2021.115251 , Impact Factor: 4.051

  1. Jitendra. S. Tate , Harish Kallagunta, and Andrew Alvarez, “Flammability and Mechanical Performance of MWCNT Incorporated Cyanate Ester/Carbon Fiber Composites”, Journal of Polymer Materials-An International Journal, Vol. 38, No. 1-2 Comb. (Jan-Jun 2021), pp101-120 Ref# JPM-D20-017RER, accepted 04/26/2021, published February 2022 DOI : DOI : https://doi.org/10.32381/JPM.2021.38.1-2.9 , Impact Factor: 0.377
  2. Harish Kallagunta and Jitendra S. Tate, “Low Velocity Impact Behavior of Glass Fiber Epoxy Composites Modified with Nanoceramic Particles”, Accepted to the Journal of Composite Materials, Sage Publications, December 10, 2019. https://doi.org/10.1177/0021998319893435.
  3. J. S. Tate, Dinesh Kumar Kannabiran Vasudevan, Vasconcellos Murphy Shelby E., Kunal Kumar, Stephan Sprenger, “Effect of CTBN Micro-Rubber Particles on Fatigue Performance of Carbon Fiber Reinforced Epoxy Composites”, Nano Trends: A Journal of Nanotechnology and Its Applications, Vol 20, No. 2 (2018). http://techjournals.stmjournals.in/index.php/NTs/issue/view/24 
  4. Harishsaiprasad Kallagunta and Jitendra S Tate, “Damage Mechanisms in Multiwall Carbon Nanotube-based Carbon Fiber Reinforced Composites under Ballistic Impact Loading”, Nano Trends: A Journal of Nanotechnology and Its Applications, Vol 20, No. 2 (2018). http://techjournals.stmjournals.in/index.php/NTs/issue/view/24
  5. Jitendra S. Tate, Adekunle T. Akinola, Sergio Espinoza, Swapnil Gaikwad, Dinesh Kumar Kannabiran Vasudevan, Stephen Sprenger and Kunal Kumar, “Tension-tension fatigue performance and stiffness degradation of nanosilica modified glass fiber reinforced composites”, Journal of Composites Materials, Sage Publications, May 2017, https://doi.org/10.1177/0021998317714855
  6. Tate, J. , Hernandez, R.A., Hanks, C., Trybula, W., & Fazarro, D (2016). “Addressing ethical and safety issues of nanotechnology in health and medicine in undergraduate engineering and technology curriculum”, Global Journal of Engineering Education, 18 (1), pp 30-34.

http://www.wiete.com.au/journals/GJEE/Publish/vol18no1/04-Tate-J.S.pdf

  1. D. Fazarro, C. Hanks, J. Tate, and W. Trybula, and (2016). “Introducing Engineering And Technology Majors To Nano-Safety And Ethics”, The Technology Interface International Journal (TIIJ). Volume 17, Number 1, Fall/Winter 2016, pp 5-17.  http://tiij.org/issues/issues/fall2016/fall_winter_2016.htm  
  2. J. Tate, S. Espinoza, D. Habbit, C. Hanks, W. Trybula, and D. Fazarro, "Military and National Security Implications of Nanotechnology", Journal of Technology Studies, Issue 1, Volume XLI, Spring 2015. http://scholar.lib.vt.edu/ejournals/JOTS/
  3. D. Fazarro, J. Tate, W. Trybula, C. Hanks, R. McLean, S. Dutta, and A. Mokhtari, “Evaluating Students’ Perceptions for the Ethics Module Content in Nanotechnology Safety: Meeting the Needs for Post-Secondary Students in STEM Areas”, Journal of Technology, Management, and Applied Engineering, vol. 31, no. 1, Jan-March 2015.

https://c.ymcdn.com/sites/www.atmae.org/resource/resmgr/JTMAE/Evaluating_Students%e2%80%99_Percept.pdf 

  1. R. K. Pandey, W. A. Stapleton, J. S. Tate, A. K. Bandyopadhyay, I. Sutanto, S. Sprissler and S. Lin. “Applications of CCTO supercapacitor in energy storage and electronics” AIP Advances, 25 vol.3, issue 6. http://link.aip.org/link/?ADV/3/062126&aemail=author, June 2013,

DOI: 10.1063/1.4812709

  1. J. S. Tate, S.Gaikwad, N. Theodoropoulou, E. Trevino, and J. H. Koo, “Carbon/phenolic nanocomposites as advanced thermal protection material in aerospace applications”, Journal of Composites, Hindwai Publications, vol. 2013, Article ID 403656, 9 pages, June 2013. doi:10.1155/2013/403656. http://www.hindawi.com/journals/composites/contents/
  2. J Koo, M. Natali, J. Tate, and E. Allcorn, “Polymer Nanocomposites as Advanced Ablatives – A Comprehensive Review,” International Journal of Energetic Materials and Chemical Propulsion, 12 (2), (2013), 119-162.
  3. J.S. Tate, Esmer Trevino, Swapnil Gaikwad, Stephen Sprenger, Isidro Rosas, and Matt Andrews,Low-velocity impact studies on glass reinforced composites using rubber micro-particles and silica nano-particles modified epoxy resin”, Journal of Nanoscience, Nanoengineering, and Applications, vol. 3, issue 1, ISSN: 2231-1777, January 2013.
  4. S.Gaikwad, J. S. Tate, N. Theodoropoulou, and J. H. Koo , “Electrical And Mechanical Properties Of PA11 Blended With Nanographene Platelets Using Industrial Twin Screw Extruder For Selective Laser Sintering”, Journal of Composites Materials,  vol. 47, issue 23, pp. 2973-2986,  October 2013, Available online September 2012.

http://jcm.sagepub.com/content/early/2012/09/25/0021998312460560.full.pdf+html

  1. J.S. Tate, S. Gaikwad, C. J. Jacobs, W. Stapleton, N. Theodoropoulou, and J. H. Koo, “PA11 Blended With Nanographene Platelets Using Sonication For ESD Applications, Nanotrends - A Journal of Nanotechnology & its Applications, vol. 13, Issue 1, pp. 18-31, August 2012.
  2. C. Jacobs, J. S. Tate, B. Olson, N. Theodoropoulou, and J. Koo, “Thermal characterization of nylon 11 / nanographene platelet nanocomposites” , Journal of Nanoscience and Nanotechnology, American Scientific Publishers, vol. 12, no. 3, pp. 1799–1805(7), March 2012
  3. D. Kabakov, J. S. Tate, and J. Koo, “Effect of dispersion techniques on flammability and mechanical properties of phenolic/E-glass nanocomposites”, Journal of Fire Science, Sage Publications, vol. 29, no. 5, pp. 387-402, September 2011.
  4. J. S. Tate, D. Kabakov, and J.Koo, “Carbon/phenolic nanocomposites for ablative applications”, SAMPE Journal, vol. 47, no. 3, pp. 36-43, May/June 2011.
  5. J. S. Tate, A. T. Akinola, and D. Kabakov, “Biobased nanocomposites: an alternative to traditional composites”, Journal of Technology Studies, vol. XXXV, no. 1, pp. 25-32, 2009.
  6. J. S. Tate, A. D. Kelkar, and V. A. Kelkar, “Minimizing scatter in load-controlled fatigue test data of textile polymeric composites using statistical techniques”, Journal of Interdisciplinary Mathematics, vol. 12, no. 2, pp. 283-292, 2009.
  7. J. S. Tate and A.D. Kelkar, “Stiffness degradation modeling of biaxial braided composites”, Composites Part B: Engineering, vol. 39, no. 3, pp. 548-555, 2008.
  8. J. S. Tate and V. Sriraman, “Developing research aptitude in senior year manufacturing engineering students”, UICEE’s World Transactions on Engineering and Technology Education, vol. 6, no.2, pp. 267-70, 2007.
  9. J. S. Tate and V. Sriraman,  “Project based approach to teaching of ‘computer aided engineering’ to a multidisciplinary student population”, UICEE’s World Transactions on Engineering and Technology Education, vol. 6, no. 1, pp. 71-74, 2007.
  10. X. Tang, J. Whitcomb, A. D. Kelkar, and J. S. Tate, “Progressive failure analysis of 2x2 braided composites exhibiting multiscale heterogeneity”, Composites Science and Technology, vol. 66, issue 14, pp. 2580-2590, 2006.
  11. J. S. Tate A. D. Kelkar, and J. D. Whitcomb, “Effect of braid angle on fatigue performance of biaxial braided composites”, International Journal of Fatigue, vol.28, issue 10, pp. 1239-124, 2006.
  12. A. D. Kelkar, J. S. Tate, and R. Bolick, “Structural integrity of aerosapce textile composites under fatigue loading”, Materials Science and Engineering: B, vol. 132, issues 1-2, pp. 79-84, 2006.
  13. A. D. Kelkar, J. S. Tate, and P. Chaphalkar, “Performance evaluation of VARTM manufactured textile composites for aerospace and defense applications”, Materials Science and Engineering: B, vol. 132, issues 1-2, pp. 126-128, 2006.
  14. A. D. Kelkar and J. S. Tate, “Low cost manufacturing of textile composite using VARTM process”, International Journal of Manufacturing Technology and Research, vol. 1, 2004.

 

CONFERENCE PAPERS

  1. Oluwasola K. Arigbabowo, Liam Omer, and Jitendra Tate, “Mechanical and Electrical Characterization of 3D Printed Polyamide 6/Nanographene Composite for Electrostatic Discharge Applications”, SAMPE 2022 International Conference Proceedings. Charlotte, NC, May 23-26, 2022. Society for the Advancement of Material and Process Engineering, North America, pp…., DOI or, ISBN
  2. Connor Hammond1 and Jitendra Tate*,1,2 “Development of a low Thermal Expansion SLA resin for Nickel Plating Applications”, SAMPE 2022 International Conference Proceedings. Charlotte, NC, May 23-26, 2022. Society for the Advancement of Material and Process Engineering, North America, pp…., DOI or, ISBN
  3. Subash Panta1, Elizabeth Nichol Alvizo, Matt Candelas, Harrison Thramann, and  Jitendra S. Tate, “Sustainable High-Quality Bio-Composite of Novice Natural Fiber-Reinforced Polylactic Acid (PLA)”, CAMX 2021 Proceedings.  Dallas, TX, October 18-21, 2021. CAMX – The Composites and the Advanced Materials Expo  ISBN: 978-1-934551-39-40-0 , pp. 1252-1264 ​Folder icon CAMX 2021Proceedings
  4. Camila Belduque, Tanjina Ahmed, Wilhelmus Geerts, Subash Panta, Harrison Thramann, Liam Omer, and Jitendra Tate, “Mechanical Properties of Re-Extruded SrFe12O19(OP-71)/PA12 Filaments via Twin-Screw Extrusion for Fused Filament Fabrication”, CAMX 2021 Proceedings.  Dallas, TX, October 18-21, 2021. CAMX – The Composites and the Advanced Materials Expo  ISBN: 978-1-934551-39-40-0, pp. 1265-1273,  ​Folder icon CAMX 2021Proceedings
  5. Camila Belduque, Ryan Robinson, Adrian Medina, Tanjina Ahmed, Rijul Kala, Wilhelmus Geerts, and Jitendra Tate, “Additive Manufactured Strontium Ferrite/Polyamide 12 Composites for Magnetic Devices using Twin-Screw and Single-Screw Extrusion”, TP21-0000000492, SAMPE NeXus Proceedings. Virtual Event, June 29-July 1,2021. Society for the Advancement of Material and Process Engineering, North America, ISBN: 978-1-934551-39-4 pp.686-697   ​pdf icon  SAMPE neXus 2021 Proceedings
  6. Esmerehildo Trevino, Camila Belduque, and Jitendra Tate, Mechanical Performance of Needle-Punched Carbon Fiber Reinforced Phenolic Composites”, TP21-0000000493, SAMPE NeXus Proceedings. Virtual Event, June 29-July 1,2021. Society for the Advancement of Material and Process Engineering, North America, ISBN: 978-1-934551-39-4 pp. 698-707,

 ​pdf icon  SAMPE neXus 2021 Proceedings

  1. Aziza G Nahar, Liam Omer, Matthew T Diaz and Jitendra S. Tate, “Processing and Characterization of High temperature Phenolic Nanocomposites”, TP21-0000000446, SAMPE NeXus Proceedings. Virtual Event, June 29-July 1,2021. Society for the Advancement of Material and Process Engineering, North America, ISBN: 978-1-934551-39-4, pp. 330-337, ​pdf icon  SAMPE neXus 2021 Proceedings
  2. Tanjina Nasreen Ahmed, Maria Camila Belduque, Binod D.C., Jitendra Tate, Wilhelmus J. Geerts, "Time dependence of magnetic moment of strontium-ferrite powder measured with a biaxial vibrating sample magnetometer (VSM)", AIP Advances 11, 015048 (2021); https://doi.org/10.1063/9.0000216
  3. Subash Panta, Jitendra S. Tate, and Harish S.P. Kallagunta , “Comparison of Dispersion, Wettability, Viscosity and Mechanical Properties of Unsaturated Polyester Nanocomposites Consisting Vinyl Silane and Dichloro Dimethyl Silane Treated Alumina Nanofibers”, University Research Symposium-URS, CAMX 2020, Sep. 21-24, 2020, Orlando, FL, 3nd Place, $300 in Undergraduate Category.
  4. Esmerehildo Trevino2 Jitendra Tate1,2,*, and Camila Belduque2, “Performance Evaluation of 2.5D Needle-Punched CFRP/Phenolics Composites”, CAMX 2020, Sep. 21-24, 2020, Orlando, FL.
  5. Harish S.P. Kallagunta, Jitendra S. Tate, Gary W. Beall, Subash Panta, Maria Beldeque, Muzaffer Akanda, and Rafiqul Islam, “Effects of Surface Treatment of Alumina Nanofibers on Mechanical and Thermal Properties of Polyester E-Glass Composites”, SAMPE 2020, Seattle, May 4-7, 2020.
  6. Elizabeth N. Alvizo, Jitendra S. Tate, Serra E. Holthaus, and Jennifer A. Irvin, “Characterization      and Sustainable Retting of Ragweed Fibers”, SAMPE 2020, Seattle, May 4-7, 2020.
  7. Oluwasola K. Arigbabowo, Jitendra S. Tate, Micheal LePere, Henry Okeke, Jesse Garcia, and Aziza Nahar, “Mechanical and Electrical Properties of 3D Printed PA6 Nanocomposites”, SAMPE 2020, Seattle, May 4-7, 2020.
  8. Harish S. P. Kallagunta, Subash Panta, Aziza Nahar, and Jitendra S. Tate, “Assessment of Effects of Alumina Nanofibers on Wettability, Viscosity, and Mechanical Properties of Unsaturated Polyester”, SAMPE 2020, Seattle, May 4-7, 2020.
  9. Harish Kallagunta and Jitendra S. Tate, “Ballistic Performance of E-Glass Polyester Composites Modified with Silane Treated Alumina nanofibers”, 34th ASC (American Society for Composites) Conference, Atlanta, GA, September 23-25, 2019. 
  10. J. S. Tate, O. K. Arigbabowo, Shree Swayam, and Roger Faria, “Fatigue Performance of Carbon Fiber Reinforced Nanosilica Modified Epoxy Composites”, CAMX 2019, Anaheim, CA, September 21-24, 2019.
  11. J. S. Tate, R. P. Brushaber, E. Danielsen, H. Kallagunta, S. V. Navale, O. Arigbabowo,

S. Shree, and A. Yaseer, “Electrical and Mechanical Properties of Fused Filament Fabrication of Polyamide 6 / Nanographene Filaments at Different Annealing Temperatures”, Solid Freeform Fabrication (SFF) Symposium 2019, Austin, TX, August 12-14, 2019.

  1. Harish Kallagunta and Jitendra S. Tate, “Nano-Ceramic Modified Polymer Matrix Glass Composites for Impact Applications”, SAMPE 2019, Charlotte, May 20-23, 2019.
  2. Swayam Shree, Jitendra S. Tate, and Abhay Deshpande, “Mechanical Characterization of Core Shell Rubber Particles Modified Vinyl Ester and Glass Fiber Reinforced Composites”, SAMPE 2019, Charlotte, May 20-23, 2019.
  3. J. S. Tate and K. Kallagunta (2018), “Low velocity impact performance of nano-alumina modified epoxy composites”, CAMX 2018, Dallas, TX, USA, October 15-18, 2018.
  4. J. S. Tate, S. Shree, S. Vasconcellos-Murphy, W. Schneider, “Fatigue Performance of Core Shell Rubber Particles Modified Epoxy and Glass Fiber Reinforced Composites”, CAMX 2018, Dallas, TX, USA, October 15-18, 2018.
  5.  J.S. Tate, A.W. Alo, J.M. Slupsky, C.E. Fuentes, J.D. Ratcliff, and K.Mix (2018), “Cellulose Fibers Extracted from Common Ragweed” CAMX 2018, Dallas, TX, USA, October 15-18, 2018.
  6. R. McDermott, J. S. Tate, J. H. Koo, T. Kunze, E. Trevino, E. Danielson, S. Vasconcellos Murphy, “Advanced Thermal Protection System Composite using Needle Punched Silica Fabrics”, CAMX 2018, Dallas, TX, USA, October 15-18, 2018. The Best Paper Award in MS Category, University Research Symposium, $750.
  7. J.S. Tate, S.V. Navle, R.M. Ramirez, H. Lee, and D. Nguyen (2018), “Characterization of 3D Printed Polyamide Nanocomposites”, SAMPE 2018, Long Beach, CA, May 21-24, 2018.
  8. J. S. Tate, Vasconcellos-Murphy, Shelby E., Shree. Swayam, Schneider, William J., Stephan Sprenger and Kunal Kumar (2018), “Fatigue Performance of Carbon Fiber Reinforced Hybrid Nanocomposites”,  SAMPE 2018, Long Beach, CA, May 21-24, 2018.
  9. J. S. Tate1*, Dinesh Kumar Kannabiran Vasudevan, Vasconcellos Mattocks, Shelby E., Stephan Sprenger and Kunal Kumar (2017), “Tension-tension Fatigue Performance of Carbon Fiber Reinforced Hybrid Nanocomposites”, CAMX 2017, Orlando, FL, USA, Dec 11-14, 2017.
  10. J.S. Tate*, S.V. Navle, B. Asiabanpor, J. Cerda, S.A. Huff, B.J. Glaser, K.L. Mehlhorn, and M.H. Mitchell (2017), “Electrical and Mechanical Properties of PA11 Blended with Nanographene Platelets Using Industrial Twin-Screw Extruder for Fused Deposition Modeling”, SAMPE 2017, Seattle, May 22-25, 2017.
  11. J.S. Tate*, J.M. Slupsky, J. Torres, M. Summers, L.A Duval, A. Jimenez  (2017), “Thermal And Mechanical Characterization Of Thermoplastics Polyurethane Nanocomposites Modified Using Low-Cost Nanosilica From Rice Husk”, SAMPE 2017, Seattle, WA, May 22-25, 2017.
  12. J. S. Tate, Dinesh Kumar Kannabiran Vasudevan, Stephan Sprenger, and Kunal Kumar, (2016). “ Fatigue Performance of Carbon Reinforced Composites Containing Reactive Liquid Rubbers”,  CAMX 2016, The Composites and Advanced Materials Expo, Anaheim, CA, September 26-29. 2016..
  13.  R. Hernandez, D. Slaughter, D. Whaley, J. Tate, and B. Asiabanpour, (2016). “Analyzing The Tensile, Compressive,and Flexural Properties of 3D Printed ABS P430 Plastic Based on Printing Orientation Using Fused Deposition Modeling”, Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 8-10, 2016. https://sffsymposium.engr.utexas.edu/TOC2016  
  14. Hanks, JC, Tate, J, Fazarro, D., Trybula, W., Maleki, S., (2015). “Encouraging Attention to

the Humanitarian Dimensions of Emerging Technologies: Using Case-Studies to Further

Student Engagement.” Proceedings of the IEEE Global Humanitarian Technology Conference, Seattle, WA, October 13-16, 2015.

  1. D. Fazarro, W. Trybula, and J. Tate, "Modular Implementation Success in Nano-safety: The Impact on Engineering, and Technology Majors", American Society of Safety Engineers (ASSE), June 7-10, 2015, Dallas, TX, USA.
  2. J. Tate, A. Alvarez, D. Habbit, and J. H. Koo, “Carbon-reinforced Cyanate Ester Composites”, SAMPE Tech 2015, Baltimore, MA, May 18-21, 2015.
  3. Hanks, JC, Tate, J, Fazarro, D., Trybula, W., and Maleki, S., (2015). A multi-disciplinary multi-institutional approach to teaching ethics of emerging technologies. Proceedings of The 2015 American Society of Engineering Education (ASEE) Gulf-Southwest Annual Conference, March 25-27, 2015.
  4. Hanks, J.C., Tate, J.S., Fazarro, D.E, Trybula, W. McLean, R.J.C., Dutta, S., Allhoff, F. Barton. S., and Russell, Z. “Fostering Ethical, Social, Environmental, Health, and Safety Awareness in Tomorrow's Engineers and Technologists,” ASME 2014 International Mechanical Engineering Congress, Montreal, CA. November 14-20, 2014
  5. J. Tate, C. Hanks, D. Fazarro, W. Trybula, S. Dutta, and R. McLean, “NUE: NanoTRA- Texas Regional Alliance to Foster Nanotechnology Environment, Health, and Safety Awareness in Tomorrow’s Engineering and Technology Leaders”, 121st ASEE Annual Conference and Exposition, Indianapolis, IN, June 15-18, 2014.
  6. Hanks, J. Tate, D. Fazarro, W. Trybula, S. Dutta, F. Allhoff, and R. McLean, “The Continuing Shock of the New: Some Thoughts on why Law, Regulation, and Codes are Not Enough to Guide Emerging Technologies”, 121st ASEE Annual Conference and Exposition, Indianapolis, IN, June 15-18, 2014.
  7. J. Tate, A. Alvarez, S. Espinoza, D. Habbit, and J. Koo, “Effects of Multiwall Carbon Nanotubes (MWCNT) on Thermal Properties of Cyanate Ester Composites”, SAMPE Tech 2014, Seattle, WA, June 2-5, 2014.
  8. J. Tate, A. Akinola, S. Gaikwad, S. Espinoza, A. Alvarez, D. Habbit, and S. Sprenger “Tension-Tension Fatigue Performance of Nanosilica Modified Epoxy/Glass Nanocomposites”, SAMPE Tech 2014, Seattle, WA, June 2-5, 2014.
  9. Hanks, J. Tate, D. Fazarro, W. Trybula, S. Dutta, and R. McLean “A Multi-Disciplinary, Multi-Institutional Approach to Teaching Ethical, Social, Health, Safety, and Environmental Issues in Nanotechnology”, 2014 IEEE International Symposium on Ethics in Engineering, Science, and Technology, Chicago, IL, May 23-24, 2014.  
  10. J. H. Koo, S. C. Lao, A. Hao, T. J. Moon, G. E. Wissler, L. A. Pilato, and J. Tate, “Role of different nanoparticles in flame retardant Polyamide 11 nanocomposites”, Proc. 5th International Seminar on Modern Polymeric Materials for Environmental Applications, Krakow, Poland, May 15-17, 2013.
  11. J. H. Koo, M. Natali, J. Tate, and T. Mensah, “Polymer Nanocomposites for Advanced Ablative Materials – A Comprehensive Review,” 9th International Symposium on Special Topics in Chemical Propulsion, Quebec City, Quebec, Canada, July 9-13, 2012.
  12. J. Koo, M. Natali, J. Tate, and M. Mensah, “A Review of Polymer Nanocomposites as Advanced Thermal Protection Materials”, International SAMPE Symposium and Exhibition (ISSE 2012), Baltimore, MD, USA, May 21-24, 2012.
  13. S. Gaikwad, J. S. Tate, N. Theodoropoulou, E. Trevino, M. Andrews, and J. H. Koo “PA11/Nanographene platelet nanocomposite for selective laser sintering (SLS)”, International SAMPE Symposium and Exhibition (ISSE 2012), Baltimore, MD, USA, May 21-24, 2012. ID#2088.
  14. J. S. Tate, S. Gaikwad, C. Jacobs, E. Trevino, and A. Herrera, “Comparison of mechanical performance of Halloysite nanotubes modified polyurethane glass composites using aliphatic and aromatic isocynates”, International SAMPE Technical Conference (ISTC 2011), Forth Worth, TX, USA, Oct 17-21, 2011.  ID#1724.
  15. R. Schultz, J. S. Tate, S. GaikwadE. Trevino, and C. Jacobs, “Low velocity impact studies on rubber micro-particles and silica nano-particles modified epoxy glass composites”, International SAMPE Technical Conference (ISTC 2011), Forth Worth, TX, USA, Oct 17-21, 2011.  ID#1725.
  16. C. Jacobs, J. S. Tate, R. Schultz, E. Trevino, S. Gaikwad, J. Koo, B. Williams, and A. Matthes,  “Development of MWCNT modified phenolic carbon nanocomposites for rocket nozzle: collaboration with Fredericksburg High-school”, International SAMPE Technical Conference (ISTC 2011), Forth Worth, TX, USA, Oct 17-21, 2011.  ID#1726.
  17. J. S. Tate, C. J. Jacobs, S. Gaikwad, B. Olson, W. Stapleton, N. Theodoropoulou ,and J. Koo, “Thermal and electrical properties of Polyamide 11/Nanographene Platelet Nanocomposites”, International SAMPE Symposium and Exhibition (ISSE 2011), Long Beach, CA, USA, May 23-26, 2011. ”, ID#1262
  18. J. S. Tate, C. J. Jacobs, and J. Koo, “Dispersion of MWCNT in phenolic resin using different dispersion techniques and evaluation of thermal properties”,. International SAMPE Symposium and Exhibition (ISSE 2011), Long Beach, CA, USA, May 23-26, 2011. ID#1261.
  19. J. S. Tate, D. Kabakov, and J.Koo, “Carbon/phenolic nanocomposites for ablative applications” International SAMPE (The Society for the Advancement of Material and Process Engineering) Technical Conference (ISTC 2010), Salt Lake City, UT, USA, Oct 11-14, 2010, ID# 670. 
  20. J. S. Tate, A. T. Akinola, and S. Sprenger, “Mechanical performance of  nanosilica modified epoxy/glass composites for wind turbine applications”, International SAMPE Symposium and Exhibition (ISSE 2010), Seattle, WA, USA, May 18-21, 2010, ID#188.
  21. D. Kabakov, J. S. Tate, and J. Koo, “Effect of dispersion techniques on FST and mechanical properties of phenolic/E-glass nanocomposites”, International SAMPE Symposium and Exhibition (ISEE 2010), Seattle, WA, USA, May 18-21, 2010.
  22. J. S. Tate, D. Kabakov, J. Koo and S. Lao, “Nanoreinforced phenolic composites – flammability and mechanical properties”, International SAMPE Symposium and Exhibition (ISSE 2009), Baltimore, MD, USA, May 18-21, 2009, ID# B107.
  23. J. S. Tate, A. T. Akinola, P. Patel and J. Massingill, “Nano-modified soy-based polyurethane/E-glass composites – mechanical and thermal properties”, International SAMPE Symposium and Exhibition (ISSE 2009),Baltimore, MD, USA, May 18-21, 2009, ID# B106.
  24. J. S. Tate, J. Massingill, P. Patel, and S. Konga, “Enhancement in mechanical properties by improving fiber/matrix adhesion in bio-based polyurethane/E-glass composites”, International SAMPE Symposium and Exhibition (ISSE 2008), Long Beach, CA, USA, May 18-22, 2008, ID# L079 .
  25. J. S. Tate, J. Massingill, P. Patel, P. Rikka, and S. Arabie, “Mechanical characterization of bio-based polyurethane/e-glass composites”, International SAMPE Fall Technical Conference (ISTC 2007), Cincinnati, OH, USA, October 29 – November 1, 2007, ID# C149.
  26. J. S. Tate and V. Sriraman, “Individual project-based approach to develop research aptitude in manufacturing engineering students”, ASEE (American Society for Engineering Education) 2007 Annual Conference and Exposition, Honolulu, Hawaii, USA, June 24-27, 2007, ID# AC 2007-263.
  27. J. S. Tate, A.D. Kelkar, and G. Beall, “Viscoelastics effects on fatigue behavior of braided composites”, ASME (American Society of Mechanical Engineers) 2006 International Mechanical Engineering Congress and Exposition, Chicago, IL, November 5-10, 2006.
  28. J. S. Tate and V. Sriraman, “An approach to teaching computer aided engineering to a diverse student population”, ASEE 2006 Annual Conference and Exposition, Chicago, IL, USA, June 18-21, 2006, ID# 2006-2658.
  29. J. S. Tate and A. D. Kelkar, “Flexural behavior of biaxial braided composites”, ASME 2005 International Mechanical Engineering Congress and Exposition, Orlando, Florida, USA, November 5-11, 2005, ID# IMECE2005-81324.
  30. R. Bolick, A. D. Kelkar, J. Taylor, and J. S. Tate, “Performance evaluation of    unstitched, stitched, and z-pinned textile composites under static loading“, ASME 2005 International Mechanical Engineering Congress and Exposition, Orlando, Florida, USA, November 5-11, 2005, ID# IMECE2005-81053.
  31. R. Bolick, A. D. Kelkar, and J. S. Tate, “Interlaminar shear strength comparison of stitched, unstitched, and braided composites”, International SAMPE Technical Conference (ISTC 2005), Seattle, Washington, USA, October 31-November 3, 2005, ID# P126.
  32. J. S. Tate, A. D. Kelkar, D.Goyal, J. D. Whitcomb and X. Tang, “Behavior of biaxial braided composites subjected to uniaxial tensile loading”, American Society for Composites (ASC), 20th Annual Technical Conference, Philadelphia, PA, USA, September 7-9, 2005.
  33. D. Kelkar, J. S. Tate, and P. Chaphalkar, “Performance evaluation of VARTM manufactured textile composites for aerospace and defense applications”, The 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005), Singapore, July 3-8, 2005.
  34. D. Kelkar, J. S. Tate, and R. Bolick, “Structural integrity of aerosapce textile composites under fatigue loading”, The 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005), Singapore, July 3-8, 2005.
  35. J. S. Tate, A. D. Kelkar, and R. Bolick, “Performance evaluation of notched biaxial braided composites”, ASME 2004 International Mechanical Engineering Congress and Exposition, Anaheim, CA, November 13-19, 2004, ID# IMECE2004-59883.
  36. J. S. Tate and A. D. Kelkar, “Effect of braid angle on fatigue performance of biaxial braided composites”, The 3rd International Conference on Fatigue of Composites (ICFC), Kyoto, Japan, September 13-15, 2004.
  37. D. Kelkar, J. S. Tate, and J. D. Whitcomb, “Durability of VARTM manufactured textile composites”, International Conference on Advances in Structural Integrity (ICASI), Bangalore, India, July 14-17, 2004.
  38. J. S. Tate, A. D. Kelkar, and V. A. Kelkar, “Failure analysis of biaxial braided composites under fatigue loading”, The 15th European Conference of Fracture (ECF), Stockholm, Sweden, August 11-13, 2004.
  39. J. S. Tate, A. D. Kelkar and J. Rice, “Feasibility study of VARTM manufacturing of carbon biaxial braided composites using EPON 9504 epoxy resin system”, 8th Japan International SAMPE Symposium & Exhibition (JISSE-8), Tokyo, November 18-21, 2003.
  40. D. Kelkar and J. S. Tate, “Fatigue behavior of VARTM manufactured biaxial braided composites”; ASME 2003 International Mechanical Engineering Congress and Exposition, Washington, D.C., USA, November 15-21, 2003, ID# IMECE2003-43850.   
  41. R. Bolick, A. D. Kelkar and J. S. Tate, “Fatigue behavior of post-impacted VARTM manufactured woven laminates”, International SAMPE Technical Conference, (ISTC 2003) Dayton, Ohio, USA, September 28-October 2, 2003. 
  42. D. Kelkar, J. S. Tate and R. Bolick, “Introduction to low cost manufacturing of composite laminates”, Unique Lab Experiments Poster Session, ASEE 2003 Annual Conference & Exposition, Nashville, TN, USA, June 22- 25, 2003.
  43. D. Kelkar and J. S. Tate, “Effect of fatigue loading on the stiffness degradation of VARTM manufactured biaxial braided composites”, 9th International Conference on the Mechanical Behavior of Materials (ICM9), PALEXPO Congress Center, Geneva, Switzerland, May 25-29, 2003.
  44. D. Kelkar and J. S. Tate, J. D. Whitcomb and X. Tang, “Performance evaluation and modeling of braided composites”; 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, USA, April 7-10, 2003, ID# AIAA 2003-1475.
  45. D. Kelkar and J. S. Tate; “Low cost manufacturing of textile composites using vacuum assisted resin transfer molding”, The 20th All India Manufacturing Technology, Design and Research Conference (AIMTDR), Ranchi, India, December 12-15, 2002, pp. 712-716.
  46. R. Bolick, A. D. Kelkar and J. S. Tate, “Comparative study of riveted joints and adhesively bonded joints subjected to fatigue loading”, 8th International Fatigue Congress, FATIGUE 2002, Stockholm, Sweden, June 2-7, 2002, pp. 1087-1094.

POSTERS ONLY

  1. Ahmed, T. N. (Corresponding Author), Henderson, L. (Author), Belduque Correa, M. C. (Author), Tate, J. (Author), Chen, M. (Author), Geerts, W. J. (Author), International Research Conference Texas State University, "Effect on the

magnetic properties of MFAAM process on hard and soft magnetic 3D printed composite materials measured with a biaxial Vibrating Sample Magnetometer (VSM) and Torque Magnetometer (TM)," Graduate College, Texas State University, San Marcos, United States. (April 6, 2021).

  1. Subash Panta, Jitendra Tate, and Harish Kallagunta, “Analysis of Dispersion, Wettability, Viscosity and Mechanical Properties of Unsaturated Polyester Nanocomposites Consisting of Dichlorodimethyl Silane Treated Alumina Nano-fibers”,  SPE-Automotive Composite Conference & Exhibition, September 9-11, 2020, Detroit, MI, 3rd Place in Undergraduate Category, $200
  2. Camila Belduque, Tanjina Ahmed, Wilhelmus J. Geerts, and Jitendra Tate, “Magnetic Moment and Magnetic Anisotropy Analysis of 3D printed Strontium Ferrite/PA12 filament under a Magnetic Field”, SPE-Automotive Composite Conference & Exhibition, September 9-11, 2020, Detroit, MI, 3rd Place in Masters Category, $200
  3. Elizabeth Alvizo and Jitendra Tate, “Development of Natural Fiber Composites”, SPE-Automotive Composite Conference & Exhibition, September 9-11, 2020, Detroit, MI.
  4. Serra E. Holthaus, Venus S. Stanton, Elizabeth N. Alvizo, Mariana Ocampo, Jitendra S. Tate, , and Jennifer A. Irvin, “Sustainable Cellulose Nanofibers from Ragweed”, Women in Science and Engineering Conference, College of Science and Engineering, Texas State University, March 6, 2020.
  5. J. S. Tate1*, O. K. Arigbabowo, Shree Swayam, and Roger Faria, “The effects of nanosilica on the static and fatigue properties of nanomodified carbon fiber reinforced epoxy composite”, SPE (Society of Plastics Engineers)  ACCE - Automotive Composites Conference & Expo, Novi, MI, September 4-6, 2019
  6. Harish Sai Prasad Kallagunta1,2, Jitendra S. Tate, “Functionalized Alumina Nanofibers Filled Polymer Nanocomposites: Mechanical and Thermal Analysis”, SPE (Society of Plastics Engineers)  ACCE - Automotive Composites Conference & Expo, Novi, MI, September 4-6, 2019
  7. Harish Kallagunta and Jitendra Tate, “Low Velocity Impact Studies on Affordable Nano Modified Glass Composites”, SPE (Society of Plastics Engineers)  ACCE - Automotive Composites Conference & Expo, Novi, MI, September 5-7, 2018.
  8. Swayam Shree and Jitendra Tate, “Fatigue Performance of Toughened Epoxy Glass Composites”, SPE (Society of Plastics Engineers)  ACCE - Automotive Composites Conference & Expo, Novi, MI, September 5-7, 2018.
  9. A.W. Alo, J.M. Slupsky, C.E. Fuentes, J.D. Ratcliff, J.S. Tate, and K.Mix (2018), “Cellulose Fibers Extracted from Common Ragweed”, SAMPE 2018, May 21-24, 2018, Long Beach, CA.
  10. R. McDermott, J. S. Tate, J. H. Koo, T. Kunze, E. Trevino, E. Danielson, “Fabrication and Mechanical Characterization of Needle Punched Fabrics for Advanced Thermal Protection Systems”, SAMPE 2018, May 21-24, 2018, Long Beach, CA.
  11. Sagar V. Navle, Jitendra S. Tate, John M. Slupsky, “Electrical and mechanical properties of metal filled conductive material using fused deposition modeling”, POWDERMET 2017, International Conference on Powder Metallurgy and Particulate Materials, June 13-16, 2017, Las Vegas, NV
  12. C. Hanks, J. Tate, W. Trybula and H. Sterns, “ NanoTRA: Texas Regional Alliance to Foster Nanotechnology Environment, Health, and Safety Awareness in Tomorrow’s Engineering and Technology Leaders”, Workshop on Overcoming Challenges to Infusing Ethics into the Development of Engineers, organized by the National Academy of Engineering, Jan 10-12, 2017, Washington D.C.
  13. J. Tate, C. Hanks, D. Fazarro, W. Trybula, R. McLean, and S. Dutta, “NSF-NUE NanoTRA: Texas Regional Alliance to Foster Nanotechnology Environment, Health, and Safety Awareness in Tomorrow’s Engineering and Technology Leaders”,  2015 NSF Nanoscale Science and Engineering Grantees Conference’ in Arlington, VA, Dec 8-9, 2015.
  14. D. Habbit, J. Tate, A. Alvarez, and J. Koo, “Carbon Fiber Reinforced Cyanate Ester Nanocomposites: Thermal, Mechanical and Electrical Characterization”, CAMX Conference, Dallas, TX., October 27-29, 2015.
  15. Slaughter, D., Tate, J., Hanks, C. Trybula, W. Fazarro, D., and McLean, R., “Safely handling of engineered nanoparticles: Hands –on ‘nanotechnology safety, teaching module.” CAMX Conference, Dallas, TX., October 27-29, 2015.
  16.  Hernandez, R. , Tate, J., Hanks, C. Trybula, W. Fazarro, D., McLean, R., and Andreas, R., “Infusion of ‘nanotechnology in health & medicine teaching module into engineering and technology courses.” CAMX Conference, Dallas, TX., October 27-29, 2015.
  17. J. Tate, S. Espinoza, D. Habbit, and A. Alvarez, "Military and National Security Implications", CAMEX 2014 The Composites and Advanced Materials Expo, Orlando, FL, October 13-16, 2014
  18. J. Tate, D. Habbit, A. Alvarez, and S. Espinoza, "Nanotechnology in Health and Medicine", CAMEX 2014 The Composites and Advanced Materials Expo, Orlando, FL, October 13-16, 2014
  19. J. Tate, C. Hanks, D. Fazarro, W. Trybula, S. Dutta, and R. McLean, “NUE: NanoTRA- Texas Regional Alliance to Foster Nanotechnology Environment, Health, and Safety Awareness in Tomorrow’s Engineering and Technology Leaders”, 121st ASEE Annual Conference and Exposition, Indianapolis, IN, June 15-18, 2014.
  20. A. Alvarez, S. Espinoza, and J. Tate,, “Effects of Nanographene Platelets (NGP) and Multiwall Carbon Nanotubes (MWCNT) on the Mechanical Properties of Epoxy Nanocomposites Using Different Dispersion Techniques”, International SAMPE Technical Conference, Oct 14-17, 2013, Wichita, KA
  21. S. Espinoza, A. Akinola, A. Alvarez, and J. Tate, “Tension-tension Fatigue Behavior of Nanosilica Modified Epoxy/Glass Nanocomposites for Wind Turbine Blades”, International SAMPE Technical Conference, Oct 14-17, 2013, Wichita, KA

This poster won first prize amongst all undergraduates, masters and doctoral student participants. http://www.engineering.txstate.edu/news/SAMPE-Sergio.html

http://www.txstate.edu/news/news_releases/news_archive/2013/November-2013/SAMPE112213.html

https://gato-edit.its.txstate.edu/school-of-engineering/News/SAMPE-Sergio.html

  1. J. Tate, A. Alvarez, and S. Espinoza, “Nanotechnology in Health and Medicine”, MAES Symposium 2013, Houston, TX , September 25 - 28, 2013.
  2. J. Tate, S. Espinoza, and A. Alvarez, “Nanotechnology- Military and National Security Implications”, MAES Symposium 2013, Houston, TX , September 25 - 28, 2013.
  3. J. Tate, A. Alvarez, and S. Espinoza, “NSF-NUE Nanotechnology Safety Education”, HSI Research Day, Texas State University - San Marcos, March 20, 2013.
  4. Bandyopadhyay, W. J. Geerts, K. Smith, A. Gregory, C. Moore, D. Palmer), J. S. Tate, and M.J. Sablik, “Plastic deformation of thin ferromagnetic films on nitinol sheet metal”, 53rd Annual Conference on Magnetism and Magnetic Materials, Austin, TX, Nov 10-14, 08.

PRESENTATION ONLY

 

  1. Henderson, L. (corresponding author), Ahmed, T. N. (author), Belduque, M. C.(author), Tate, J. S. (author), Chen, Y. (. (author), Geerts, W. J., national APS March Meeting, "Altering Magnetic Properties of Iron Filament PLA Using Magnetic Field Assisted Additive Manufacturing," APS, virtual, College Park, MD, United States. (March 18, 2021). 
  2. Ahmed, T. N. (corresponding author), Belduque, M. C. (author), Tate, J. S. (author), Geerts, W. J., national APS March meeting 2021, "Magnetic Anisotropy and Torque Analysis of Strontium Ferrite/PA12 composite filament and 3D printed

sample under a magnetic field," APS, College Park, United States. (March 18,2021).

 3. Luna, D. (Corresponding Author), Belduque Correa, M. C. (Author), Thramann, H.(Author), Panta, S. (Author), Omer, L. (Author), Ahmed, T. (Author), Tate, J.(Author), Geerts, W. J. (Author), 2021-Fall TSAPS Meeting, "Magnetic 3D Printing Filament Development and Printing Methods," TSAPS, University of Houston, Clear Lake, Houston, TX, United States. (October 21, 2021). 

4.Ahmed, T. (corresponding author), Henderson, L. (author), Belduque Correa, M. C.(author), Chen, M. Y. (Author), Tate, J. S. (author), Geerts, W. J. (author), International Polyolefins Conference, "Magnetic Field Assisted Additive Manufacturing (MFAAM) of magnetic polymer composite filaments," SPE South Texas Section, virtual. (February 23, 2021).

5. Kolton Dieckow, Chandan Howlader, Tanjina Ahmed, Maria Camila Belduque, Jitendra Tate, Wilhelmus Geerts, “Effect of Field Orientation and Infill Percentage on the VSM calibration factor of FFM 3D printed samples”, MMM 2020 conference, oral presentation, Palm Beach Florida, November 2-6-2020.

6. Lauren Henderson, Tanjina N. Ahmed, Camila Belduque, Jitendra Tate, Maggie Chen, Wilhelmus J. Geerts, Altering Magnetic Properties of Iron Filament PLA Using Magnetic Field Assisted Additive Manufacturing, TSAPS Fall-2020 meeting UT Arlington, oral presentation.

7. Lauren Henderson, Tanjina N. Ahmed, Camila Belduque, Jitendra Tate, Maggie Chen, Wilhelmus J. Geerts, Altering Magnetic Properties of Iron Filament PLA Using Magnetic Field Assisted Additive Manufacturing, TSAPS Fall-2020 meeting UT Arlington, oral presentation.

8. Tanjina Nasreen Ahmed, Maria Camila Belduque, Jitendra S. Tate, Wilhelmus J. Geerts, “Magnetic Anisotropy and Torque Analysis of Strontium Ferrite/PA12 composite filament and 3D printed sample under a magnetic field”, accepted for APS March-2021 meeting, March 15-19, 2021

9. Tanjina Ahmed, Binod D.C., Maria Camila Belduque, Jitendra Tate, Wilhelmus Geerts, “Time Dependence of Magnetic Moment of Strontium-Ferrite powder measured by biaxial VSM”, MMM-2020 conference, November 2 through 6 2020, Palm Beach Florida

10. Sagar V Navle, Jitendra S Tate, John M Slupsky, and Bahram Asiabanpour, “Comparison of mechanical and electrical properties of PA11/NGP nanocomposites and conductive metal filled PLA composites using fused deposition modeling", SFF 2017, Annual International Solid Freeform Fabrication Symposium, August 7-9, 2017, Austin, TX

11. W. Trybula, J. Tate, C. Hanks, and D. Fazarro, "Nanotechnology Safety Education", National Science and Engineering Education Workshop (NSEE), May 7, 2015.

12. E. Botello, J. Tate, N. Theodoropoulou, “Bringing Research Experiences for Physics Teachers back into the Classroom” American Association of Physics Teachers (AAPT) Winter Meeting, San Diego, CA, January 3-6, 2015.

13. D. Fazarro, J. Tate, W. Trybula, C. Hanks, S. Dutta, and R. McLean “We Are Seed Planters: A Look at Teaching Students Nanotechnology Environment, Health, and Safety Awareness”, The Association of Technology, Management and Applied Engineering (ATMAE) Annual Conference, St. Louis, MO, November 19-21, 2014 

14. D. Fazarro, J. Tate, W. Trybula, C. Hanks, S. Dutta, and R. McLean. “Preparing the Nano Workforce: At Look at Educating Undergraduate Students in Nano-Safety”, Micro Nano Technology Conference, June 4-6, 2014, Albuquerque, NM

EDITED BOOK

NANO-SAFETY What we need to know to Protect Workers , Editors: Dominick Fazarro, Walt Trybula, Jitendra Tate, and Craig Hanks, Publisher:  De Gruyter, ISBN: 978-3-11-037375-2, Published: Fall 2017, https://www.degruyter.com/view/product/431858

BOOK CHAPTERS

  1. Jitendra S. Tate and Roger Hernandez, “Chapter 4. Safety Approaches to Handling Engineered Nanomaterials”, NANO-SAFETY What we need to know to Protect Workers edited by D. Fazarro, W. Trybula, J. Tate, and C. Hanks, De Gruyter Publications, Chapter 4, ISBN: 978-3-11-037375-(2017)
  2. Walt Trybula, Dominick Fazarro, Craig Hanks, and Jitendra Tate, “Nanotechnology Safety Education”, Global Perspectives of Nanoscience and Engineering Education edited by Winkelmann and Bhushan. Springer Publications, Chapter 8, pp 223-236, 2016. ISBN: 978-3-319-31832-5 (Print) 978-3-319-31833-2 (Online) (2016) https://link.springer.com/content/pdf/10.1007%2F978-3-319-31833-2_8.pdf  
  3. Hanks, J.C., Tate, J.S., Fazarro, D.E, Trybula, W. McLean, R.J.C., Dutta, S., and Allhoff, F., “Exemplary Engineering Ethics Program: NanoTRA: Texas Regional Alliance to Foster Nanotechnology Environment, Health, and Safety Awareness in Tomorrow’s Engineering and Technology Leaders”, Infusing Ethics into the Development of Engineers: Exemplary Education Activities and Programs, The National Academies Press. Washington, DC: National Academies Press, February 2016, pp. 41-43. ISBN: 978-0-309-39085-9 DOI: 10.17226/21889.
  4. Walt Trybula, Dominick Fazarro, Craig Hanks, and Jitendra Tate, “Nanotechnology Safety Education”, National Science & Engineering Education (NSEE ) Workshop Report, National Science & Engineering Education (NSEE ), Dec 2014, pp 103-108. http://nseeducation.org/2014-documents/NSEE%20The%20Next%20Steps-Final.pdf