Skip to Content
School of Engineering
Advanced Composites Laboratory

Conference Proceedings

Conference Proceedings

Refereed Conference Proceedings:

Texas State student names are underlined. Please, note that all these conferences require full-length papers and presentations.

 

  1. Subash Panta1, Elizabeth Nichol Alvizo, Matt Candelas, Harrison Thramann, and  Jitendra S. Tate, “Sustainable High-Quality Bio-Composite of Novice Natural Fiber-Reinforced Polylactic Acid (PLA)”, CAMX 2021, Dallas, TX, October 18-21, 2021
  2. Camila Belduque, Tanjina Ahmed, Wilhelmus Geerts, Subash Panta, Harrison Thramann, Liam Omer, and Jitendra Tate, “Mechanical Properties of Re-Extruded SrFe12O19(OP-71)/PA12 Filaments via Twin-Screw Extrusion for Fused Filament Fabrication”, CAMX 2021, Dallas, TX, October 18-21, 2021

 

  1. Camila Belduque, Ryan Robinson, Adrian Medina, Tanjina Ahmed, Rijul Kala, Wilhelmus Geerts, and Jitendra Tate, “Additive Manufactured Strontium Ferrite/Polyamide 12 Composites for Magnetic Devices using Twin-Screw and Single-Screw Extrusion”, SAMPE 2021, Long Beach, CA, May 24-27, 2021.
  2. Esmerehildo Trevino, Camila Belduque, and Jitendra Tate, “Mechanical Performance of Needle-Punched Carbon Fiber Reinforced Phenolic Composites”, SAMPE 2021, Long Beach, CA, May 24-27, 2021.
  3. Subash Panta, Elizabeth Nichol Alvizo, Matt Candelas, Jennifer Irvin, and Jitendra S. Tate,  “Sustainable High-Quality Bio-Composite Filament of Novice Natural Fiber Reinforced Polylactic acid (PLA), SAMPE 2021, Long Beach, CA, May 24-27, 2021.
  4. Aziza G Nahar, Liam Omer, Matthew T Diaz and Jitendra S. Tate, “Processing and Characterization of High temperature Phenolic Nanocomposites”, SAMPE 2021, Long Beach, CA, May 24-27, 2021.
  5. Tanjina Nasreen Ahmed, Maria Camila Belduque, Binod D.C., Jitendra Tate, Wilhelmus J. Geerts, "Time dependence of magnetic moment of strontium-ferrite powder measured with a biaxial vibrating sample magnetometer (VSM)", accepted for publication in AIP Advances, January 4 2021.
  6. Subash Panta, Jitendra S. Tate, and Harish S.P. Kallagunta , “Comparison of Dispersion, Wettability, Viscosity and Mechanical Properties of Unsaturated Polyester Nanocomposites Consisting Vinyl Silane and Dichloro Dimethyl Silane Treated Alumina Nanofibers”, University Research Symposium-URS, CAMX 2020, Sep. 21-24, 2020, Orlando, FL, 3nd Place, $300 in Undergraduate Category.
  7. Esmerehildo Trevino2 Jitendra Tate1,2,*, and Camila Belduque2, “Performance Evaluation of 2.5D Needle-Punched CFRP/Phenolics Composites”, CAMX 2020, Sep. 21-24, 2020, Orlando, FL.
  8. Harish S.P. Kallagunta, Jitendra S. Tate, Gary W. Beall, Subash Panta, Maria Beldeque, Muzaffer Akanda, and Rafiqul Islam, “Effects of Surface Treatment of Alumina Nanofibers on Mechanical and Thermal Properties of Polyester E-Glass Composites”, SAMPE 2020, Seattle, May 4-7, 2020.
  9.         Elizabeth N. Alvizo, Jitendra S. Tate, Serra E. Holthaus, and Jennifer A. Irvin, “Characterization      and Sustainable Retting of Ragweed Fibers”, SAMPE 2020, Seattle, May 4-7, 2020.
  10. Oluwasola K. Arigbabowo, Jitendra S. Tate, Micheal LePere, Henry Okeke, Jesse Garcia, and Aziza Nahar, “Mechanical and Electrical Properties of 3D Printed PA6 Nanocomposites”, SAMPE 2020, Seattle, May 4-7, 2020.
  11. Harish S. P. Kallagunta, Subash Panta, Aziza Nahar, and Jitendra S. Tate, “Assessment of Effects of Alumina Nanofibers on Wettability, Viscosity, and Mechanical Properties of Unsaturated Polyester”, SAMPE 2020, Seattle, May 4-7, 2020.
  12. Harish Kallagunta and Jitendra S. Tate, “Ballistic Performance of E-Glass Polyester Composites Modified with Silane Treated Alumina nanofibers”, 34th ASC (American Society for Composites) Conference, Atlanta, GA, September 23-25, 2019. 
  13. J. S. Tate, O. K. Arigbabowo, Shree Swayam, and Roger Faria, “Fatigue Performance of Carbon Fiber Reinforced Nanosilica Modified Epoxy Composites”, CAMX 2019, Anaheim, CA, September 21-24, 2019.
  14. J. S. Tate, R. P. Brushaber, E. Danielsen, H. Kallagunta, S. V. Navale, O. Arigbabowo,

S. Shree, and A. Yaseer, “Electrical and Mechanical Properties of Fused Filament Fabrication of Polyamide 6 / Nanographene Filaments at Different Annealing Temperatures”, Solid Freeform Fabrication (SFF) Symposium 2019, Austin, TX, August 12-14, 2019.

  1. Harish Kallagunta and Jitendra S. Tate, “Nano-Ceramic Modified Polymer Matrix Glass Composites for Impact Applications”, SAMPE 2019, Charlotte, May 20-23, 2019.
  2. Swayam Shree, Jitendra S. Tate, and Abhay Deshpande, “Mechanical Characterization of Core Shell Rubber Particles Modified Vinyl Ester and Glass Fiber Reinforced Composites”, SAMPE 2019, Charlotte, May 20-23, 2019.
  3. J. S. Tate and K. Kallagunta (2018), “Low velocity impact performance of nano-alumina modified epoxy composites”, CAMX 2018, Dallas, TX, USA, October 15-18, 2018.
  4. J. S. Tate, S. Shree, S. Vasconcellos-Murphy, W. Schneider, “Fatigue Performance of Core Shell Rubber Particles Modified Epoxy and Glass Fiber Reinforced Composites”, CAMX 2018, Dallas, TX, USA, October 15-18, 2018.
  5.  J.S. Tate, A.W. Alo, J.M. Slupsky, C.E. Fuentes, J.D. Ratcliff, and K.Mix (2018), “Cellulose Fibers Extracted from Common Ragweed” CAMX 2018, Dallas, TX, USA, October 15-18, 2018.
  6. R. McDermott, J. S. Tate, J. H. Koo, T. Kunze, E. Trevino, E. Danielson, S. Vasconcellos Murphy, “Advanced Thermal Protection System Composite using Needle Punched Silica Fabrics”, CAMX 2018, Dallas, TX, USA, October 15-18, 2018. The Best Paper Award in MS Category, University Research Symposium, $750.
  7. J.S. Tate, S.V. Navle, R.M. Ramirez, H. Lee, and D. Nguyen (2018), “Characterization of 3D Printed Polyamide Nanocomposites”, SAMPE 2018, Long Beach, CA, May 21-24, 2018.
  8. J. S. Tate, Vasconcellos-Murphy, Shelby E., Shree. Swayam, Schneider, William J., Stephan Sprenger and Kunal Kumar (2018), “Fatigue Performance of Carbon Fiber Reinforced Hybrid Nanocomposites”,  SAMPE 2018, Long Beach, CA, May 21-24, 2018.
  9. J. S. Tate1*, Dinesh Kumar Kannabiran Vasudevan, Vasconcellos Mattocks, Shelby E., Stephan Sprenger and Kunal Kumar (2017), “Tension-tension Fatigue Performance of Carbon Fiber Reinforced Hybrid Nanocomposites”, CAMX 2017, Orlando, FL, USA, Dec 11-14, 2017.
  10. J.S. Tate*, S.V. Navle, B. Asiabanpor, J. Cerda, S.A. Huff, B.J. Glaser, K.L. Mehlhorn, and M.H. Mitchell (2017), “Electrical and Mechanical Properties of PA11 Blended with Nanographene Platelets Using Industrial Twin-Screw Extruder for Fused Deposition Modeling”, SAMPE 2017, Seattle, May 22-25, 2017.
  11. J.S. Tate*, J.M. Slupsky, J. Torres, M. Summers, L.A Duval, A. Jimenez  (2017), “Thermal And Mechanical Characterization Of Thermoplastics Polyurethane Nanocomposites Modified Using Low-Cost Nanosilica From Rice Husk”, SAMPE 2017, Seattle, WA, May 22-25, 2017.
  12. J. S. Tate, Dinesh Kumar Kannabiran Vasudevan, Stephan Sprenger, and Kunal Kumar, (2016). “ Fatigue Performance of Carbon Reinforced Composites Containing Reactive Liquid Rubbers”,  CAMX 2016, The Composites and Advanced Materials Expo, Anaheim, CA, September 26-29. 2016..
  13.  R. Hernandez, D. Slaughter, D. Whaley, J. Tate, and B. Asiabanpour, (2016). “Analyzing The Tensile, Compressive,and Flexural Properties of 3D Printed ABS P430 Plastic Based on Printing Orientation Using Fused Deposition Modeling”, Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 8-10, 2016. https://sffsymposium.engr.utexas.edu/TOC2016  
  14. Hanks, JC, Tate, J, Fazarro, D., Trybula, W., Maleki, S., (2015). “Encouraging Attention to

the Humanitarian Dimensions of Emerging Technologies: Using Case-Studies to Further

Student Engagement.” Proceedings of the IEEE Global Humanitarian Technology Conference, Seattle, WA, October 13-16, 2015.

  1. D. Fazarro, W. Trybula, and J. Tate, "Modular Implementation Success in Nano-safety: The Impact on Engineering, and Technology Majors", American Society of Safety Engineers (ASSE), June 7-10, 2015, Dallas, TX, USA.
  2. J. Tate, A. Alvarez, D. Habbit, and J. H. Koo, “Carbon-reinforced Cyanate Ester Composites”, SAMPE Tech 2015, Baltimore, MA, May 18-21, 2015.
  3. Hanks, JC, Tate, J, Fazarro, D., Trybula, W., and Maleki, S., (2015). A multi-disciplinary multi-institutional approach to teaching ethics of emerging technologies. Proceedings of The 2015 American Society of Engineering Education (ASEE) Gulf-Southwest Annual Conference, March 25-27, 2015.
  4. Hanks, J.C., Tate, J.S., Fazarro, D.E, Trybula, W. McLean, R.J.C., Dutta, S., Allhoff, F. Barton. S., and Russell, Z. “Fostering Ethical, Social, Environmental, Health, and Safety Awareness in Tomorrow's Engineers and Technologists,” ASME 2014 International Mechanical Engineering Congress, Montreal, CA. November 14-20, 2014
  5. J. Tate, C. Hanks, D. Fazarro, W. Trybula, S. Dutta, and R. McLean, “NUE: NanoTRA- Texas Regional Alliance to Foster Nanotechnology Environment, Health, and Safety Awareness in Tomorrow’s Engineering and Technology Leaders”, 121st ASEE Annual Conference and Exposition, Indianapolis, IN, June 15-18, 2014.
  6. Hanks, J. Tate, D. Fazarro, W. Trybula, S. Dutta, F. Allhoff, and R. McLean, “The Continuing Shock of the New: Some Thoughts on why Law, Regulation, and Codes are Not Enough to Guide Emerging Technologies”, 121st ASEE Annual Conference and Exposition, Indianapolis, IN, June 15-18, 2014.
  7. J. Tate, A. Alvarez, S. Espinoza, D. Habbit, and J. Koo, “Effects of Multiwall Carbon Nanotubes (MWCNT) on Thermal Properties of Cyanate Ester Composites”, SAMPE Tech 2014, Seattle, WA, June 2-5, 2014.
  8. J. Tate, A. Akinola, S. Gaikwad, S. Espinoza, A. Alvarez, D. Habbit, and S. Sprenger “Tension-Tension Fatigue Performance of Nanosilica Modified Epoxy/Glass Nanocomposites”, SAMPE Tech 2014, Seattle, WA, June 2-5, 2014.
  9. Hanks, J. Tate, D. Fazarro, W. Trybula, S. Dutta, and R. McLean “A Multi-Disciplinary, Multi-Institutional Approach to Teaching Ethical, Social, Health, Safety, and Environmental Issues in Nanotechnology”, 2014 IEEE International Symposium on Ethics in Engineering, Science, and Technology, Chicago, IL, May 23-24, 2014.  
  10. J. H. Koo, S. C. Lao, A. Hao, T. J. Moon, G. E. Wissler, L. A. Pilato, and J. Tate, “Role of different nanoparticles in flame retardant Polyamide 11 nanocomposites”, Proc. 5th International Seminar on Modern Polymeric Materials for Environmental Applications, Krakow, Poland, May 15-17, 2013.
  11. J. H. Koo, M. Natali, J. Tate, and T. Mensah, “Polymer Nanocomposites for Advanced Ablative Materials – A Comprehensive Review,” 9th International Symposium on Special Topics in Chemical Propulsion, Quebec City, Quebec, Canada, July 9-13, 2012.
  12. J. Koo, M. Natali, J. Tate, and M. Mensah, “A Review of Polymer Nanocomposites as Advanced Thermal Protection Materials”, International SAMPE Symposium and Exhibition (ISSE 2012), Baltimore, MD, USA, May 21-24, 2012.
  13. S. Gaikwad, J. S. Tate, N. Theodoropoulou, E. Trevino, M. Andrews, and J. H. Koo “PA11/Nanographene platelet nanocomposite for selective laser sintering (SLS)”, International SAMPE Symposium and Exhibition (ISSE 2012), Baltimore, MD, USA, May 21-24, 2012. ID#2088.
  14. J. S. Tate, S. Gaikwad, C. Jacobs, E. Trevino, and A. Herrera, “Comparison of mechanical performance of Halloysite nanotubes modified polyurethane glass composites using aliphatic and aromatic isocynates”, International SAMPE Technical Conference (ISTC 2011), Forth Worth, TX, USA, Oct 17-21, 2011.  ID#1724.
  15. R. Schultz, J. S. Tate, S. Gaikwad,  E. Trevino, and C. Jacobs, “Low velocity impact studies on rubber micro-particles and silica nano-particles modified epoxy glass composites”, International SAMPE Technical Conference (ISTC 2011), Forth Worth, TX, USA, Oct 17-21, 2011.  ID#1725.
  16. C. Jacobs, J. S. Tate, R. Schultz, E. Trevino, S. Gaikwad, J. Koo, B. Williams, and A. Matthes,  “Development of MWCNT modified phenolic carbon nanocomposites for rocket nozzle: collaboration with Fredericksburg High-school”, International SAMPE Technical Conference (ISTC 2011), Forth Worth, TX, USA, Oct 17-21, 2011.  ID#1726.
  17. J. S. Tate, C. J. Jacobs, S. Gaikwad, B. Olson, W. Stapleton, N. Theodoropoulou ,and J. Koo, “Thermal and electrical properties of Polyamide 11/Nanographene Platelet Nanocomposites”, International SAMPE Symposium and Exhibition (ISSE 2011), Long Beach, CA, USA, May 23-26, 2011. ”, ID#1262
  18. J. S. Tate, C. J. Jacobs, and J. Koo, “Dispersion of MWCNT in phenolic resin using different dispersion techniques and evaluation of thermal properties”,. International SAMPE Symposium and Exhibition (ISSE 2011), Long Beach, CA, USA, May 23-26, 2011. ID#1261.
  19. J. S. Tate, D. Kabakov, and J.Koo, “Carbon/phenolic nanocomposites for ablative applications” International SAMPE (The Society for the Advancement of Material and Process Engineering) Technical Conference (ISTC 2010), Salt Lake City, UT, USA, Oct 11-14, 2010, ID# 670. 
  20. J. S. Tate, A. T. Akinola, and S. Sprenger, “Mechanical performance of  nanosilica modified epoxy/glass composites for wind turbine applications”, International SAMPE Symposium and Exhibition (ISSE 2010), Seattle, WA, USA, May 18-21, 2010, ID#188.
  21. D. Kabakov, J. S. Tate, and J. Koo, “Effect of dispersion techniques on FST and mechanical properties of phenolic/E-glass nanocomposites”, International SAMPE Symposium and Exhibition (ISEE 2010), Seattle, WA, USA, May 18-21, 2010.
  22. J. S. Tate, D. Kabakov, J. Koo and S. Lao, “Nanoreinforced phenolic composites – flammability and mechanical properties”, International SAMPE Symposium and Exhibition (ISSE 2009), Baltimore, MD, USA, May 18-21, 2009, ID# B107.
  23. J. S. Tate, A. T. Akinola, P. Patel and J. Massingill, “Nano-modified soy-based polyurethane/E-glass composites – mechanical and thermal properties”, International SAMPE Symposium and Exhibition (ISSE 2009),Baltimore, MD, USA, May 18-21, 2009, ID# B106.
  24. J. S. Tate, J. Massingill, P. Patel, and S. Konga, “Enhancement in mechanical properties by improving fiber/matrix adhesion in bio-based polyurethane/E-glass composites”, International SAMPE Symposium and Exhibition (ISSE 2008), Long Beach, CA, USA, May 18-22, 2008, ID# L079 .
  25. J. S. Tate, J. Massingill, P. Patel, P. Rikka, and S. Arabie, “Mechanical characterization of bio-based polyurethane/e-glass composites”, International SAMPE Fall Technical Conference (ISTC 2007), Cincinnati, OH, USA, October 29 – November 1, 2007, ID# C149.
  26. J. S. Tate and V. Sriraman, “Individual project-based approach to develop research aptitude in manufacturing engineering students”, ASEE (American Society for Engineering Education) 2007 Annual Conference and Exposition, Honolulu, Hawaii, USA, June 24-27, 2007, ID# AC 2007-263.
  27. J. S. Tate, A.D. Kelkar, and G. Beall, “Viscoelastics effects on fatigue behavior of braided composites”, ASME (American Society of Mechanical Engineers) 2006 International Mechanical Engineering Congress and Exposition, Chicago, IL, November 5-10, 2006.
  28. J. S. Tate and V. Sriraman, “An approach to teaching computer aided engineering to a diverse student population”, ASEE 2006 Annual Conference and Exposition, Chicago, IL, USA, June 18-21, 2006, ID# 2006-2658.
  29. J. S. Tate and A. D. Kelkar, “Flexural behavior of biaxial braided composites”, ASME 2005 International Mechanical Engineering Congress and Exposition, Orlando, Florida, USA, November 5-11, 2005, ID# IMECE2005-81324.
  30. R. Bolick, A. D. Kelkar, J. Taylor, and J. S. Tate, “Performance evaluation of    unstitched, stitched, and z-pinned textile composites under static loading“, ASME 2005 International Mechanical Engineering Congress and Exposition, Orlando, Florida, USA, November 5-11, 2005, ID# IMECE2005-81053.
  31. R. Bolick, A. D. Kelkar, and J. S. Tate, “Interlaminar shear strength comparison of stitched, unstitched, and braided composites”, International SAMPE Technical Conference (ISTC 2005), Seattle, Washington, USA, October 31-November 3, 2005, ID# P126.
  32. J. S. Tate, A. D. Kelkar, D.Goyal, J. D. Whitcomb and X. Tang, “Behavior of biaxial braided composites subjected to uniaxial tensile loading”, American Society for Composites (ASC), 20th Annual Technical Conference, Philadelphia, PA, USA, September 7-9, 2005.
  33. D. Kelkar, J. S. Tate, and P. Chaphalkar, “Performance evaluation of VARTM manufactured textile composites for aerospace and defense applications”, The 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005), Singapore, July 3-8, 2005.
  34. D. Kelkar, J. S. Tate, and R. Bolick, “Structural integrity of aerosapce textile composites under fatigue loading”, The 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005), Singapore, July 3-8, 2005.
  35. J. S. Tate, A. D. Kelkar, and R. Bolick, “Performance evaluation of notched biaxial braided composites”, ASME 2004 International Mechanical Engineering Congress and Exposition, Anaheim, CA, November 13-19, 2004, ID# IMECE2004-59883.
  36. J. S. Tate and A. D. Kelkar, “Effect of braid angle on fatigue performance of biaxial braided composites”, The 3rd International Conference on Fatigue of Composites (ICFC), Kyoto, Japan, September 13-15, 2004.
  37. D. Kelkar, J. S. Tate, and J. D. Whitcomb, “Durability of VARTM manufactured textile composites”, International Conference on Advances in Structural Integrity (ICASI), Bangalore, India, July 14-17, 2004.
  38. J. S. Tate, A. D. Kelkar, and V. A. Kelkar, “Failure analysis of biaxial braided composites under fatigue loading”, The 15th European Conference of Fracture (ECF), Stockholm, Sweden, August 11-13, 2004.
  39. J. S. Tate, A. D. Kelkar and J. Rice, “Feasibility study of VARTM manufacturing of carbon biaxial braided composites using EPON 9504 epoxy resin system”, 8th Japan International SAMPE Symposium & Exhibition (JISSE-8), Tokyo, November 18-21, 2003.
  40. D. Kelkar and J. S. Tate, “Fatigue behavior of VARTM manufactured biaxial braided composites”; ASME 2003 International Mechanical Engineering Congress and Exposition, Washington, D.C., USA, November 15-21, 2003, ID# IMECE2003-43850.   
  41. R. Bolick, A. D. Kelkar and J. S. Tate, “Fatigue behavior of post-impacted VARTM manufactured woven laminates”, International SAMPE Technical Conference, (ISTC 2003) Dayton, Ohio, USA, September 28-October 2, 2003. 
  42. D. Kelkar, J. S. Tate and R. Bolick, “Introduction to low cost manufacturing of composite laminates”, Unique Lab Experiments Poster Session, ASEE 2003 Annual Conference & Exposition, Nashville, TN, USA, June 22- 25, 2003.
  43. D. Kelkar and J. S. Tate, “Effect of fatigue loading on the stiffness degradation of VARTM manufactured biaxial braided composites”, 9th International Conference on the Mechanical Behavior of Materials (ICM9), PALEXPO Congress Center, Geneva, Switzerland, May 25-29, 2003.
  44. D. Kelkar and J. S. Tate, J. D. Whitcomb and X. Tang, “Performance evaluation and modeling of braided composites”; 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, USA, April 7-10, 2003, ID# AIAA 2003-1475.
  45. D. Kelkar and J. S. Tate; “Low cost manufacturing of textile composites using vacuum assisted resin transfer molding”, The 20th All India Manufacturing Technology, Design and Research Conference (AIMTDR), Ranchi, India, December 12-15, 2002, pp. 712-716.
  46. R. Bolick, A. D. Kelkar and J. S. Tate, “Comparative study of riveted joints and adhesively bonded joints subjected to fatigue loading”, 8th International Fatigue Congress, FATIGUE 2002, Stockholm, Sweden, June 2-7, 2002, pp. 1087-1094.