Skip to Content
School of Engineering
Advanced Composites Laboratory

Posters

Posters :

Texas State student names are underlined.

  1. Subash Panta, Jitendra Tate, and Harish Kallagunta, “Analysis of Dispersion, Wettability, Viscosity and Mechanical Properties of Unsaturated Polyester Nanocomposites Consisting of Dichlorodimethyl Silane Treated Alumina Nano-fibers”,  SPE-Automotive Composite Conference & Exhibition, September 9-11, 2020, Detroit, MI, 3rd Place in Undergraduate Category, $200
  2. Camila Belduque, Tanjina Ahmed, Wilhelmus J. Geerts, and Jitendra Tate, “Magnetic Moment and Magnetic Anisotropy Analysis of 3D printed Strontium Ferrite/PA12 filament under a Magnetic Field”, SPE-Automotive Composite Conference & Exhibition, September 9-11, 2020, Detroit, MI, 3rd Place in Masters Category, $200
  3. Elizabeth Alvizo and Jitendra Tate, “Development of Natural Fiber Composites”, SPE-Automotive Composite Conference & Exhibition, September 9-11, 2020, Detroit, MI.
  4. Serra E. Holthaus, Venus S. Stanton, Elizabeth N. Alvizo, Mariana Ocampo, Jitendra S. Tate, , and Jennifer A. Irvin, “Sustainable Cellulose Nanofibers from Ragweed”, Women in Science and Engineering Conference, College of Science and Engineering, Texas State University, March 6, 2020.
  5. J. S. Tate1*, O. K. Arigbabowo, Shree Swayam, and Roger Faria, “The effects of nanosilica on the static and fatigue properties of nanomodified carbon fiber reinforced epoxy composite”, SPE (Society of Plastics Engineers)  ACCE - Automotive Composites Conference & Expo, Novi, MI, September 4-6, 2019
  6. Harish Sai Prasad Kallagunta1,2, Jitendra S. Tate, “Functionalized Alumina Nanofibers Filled Polymer Nanocomposites: Mechanical and Thermal Analysis”, SPE (Society of Plastics Engineers)  ACCE - Automotive Composites Conference & Expo, Novi, MI, September 4-6, 2019
  7. Harish Kallagunta and Jitendra Tate, “Low Velocity Impact Studies on Affordable Nano Modified Glass Composites”, SPE (Society of Plastics Engineers)  ACCE - Automotive Composites Conference & Expo, Novi, MI, September 5-7, 2018.
  8. Swayam Shree and Jitendra Tate, “Fatigue Performance of Toughened Epoxy Glass Composites”, SPE (Society of Plastics Engineers)  ACCE - Automotive Composites Conference & Expo, Novi, MI, September 5-7, 2018.
  9. A.W. Alo, J.M. Slupsky, C.E. Fuentes, J.D. Ratcliff, J.S. Tate, and K.Mix (2018), “Cellulose Fibers Extracted from Common Ragweed”, SAMPE 2018, May 21-24, 2018, Long Beach, CA.
  10. R. McDermott, J. S. Tate, J. H. Koo, T. Kunze, E. Trevino, E. Danielson, “Fabrication and Mechanical Characterization of Needle Punched Fabrics for Advanced Thermal Protection Systems”, SAMPE 2018, May 21-24, 2018, Long Beach, CA.
  11. Sagar V. Navle, Jitendra S. Tate, John M. Slupsky, “Electrical and mechanical properties of metal filled conductive material using fused deposition modeling”, POWDERMET 2017, International Conference on Powder Metallurgy and Particulate Materials, June 13-16, 2017, Las Vegas, NV
  12. C. Hanks, J. Tate, W. Trybula and H. Sterns, “ NanoTRA: Texas Regional Alliance to Foster Nanotechnology Environment, Health, and Safety Awareness in Tomorrow’s Engineering and Technology Leaders”, Workshop on Overcoming Challenges to Infusing Ethics into the Development of Engineers, organized by the National Academy of Engineering, Jan 10-12, 2017, Washington D.C.
  13. J. Tate, C. Hanks, D. Fazarro, W. Trybula, R. McLean, and S. Dutta, “NSF-NUE NanoTRA: Texas Regional Alliance to Foster Nanotechnology Environment, Health, and Safety Awareness in Tomorrow’s Engineering and Technology Leaders”,  2015 NSF Nanoscale Science and Engineering Grantees Conference’ in Arlington, VA, Dec 8-9, 2015.
  14. D. Habbit, J. Tate, A. Alvarez, and J. Koo, “Carbon Fiber Reinforced Cyanate Ester Nanocomposites: Thermal, Mechanical and Electrical Characterization”, CAMX Conference, Dallas, TX., October 27-29, 2015.
  15. Slaughter, D., Tate, J., Hanks, C. Trybula, W. Fazarro, D., and McLean, R., “Safely handling of engineered nanoparticles: Hands –on ‘nanotechnology safety, teaching module.” CAMX Conference, Dallas, TX., October 27-29, 2015.
  16.  Hernandez, R. , Tate, J., Hanks, C. Trybula, W. Fazarro, D., McLean, R., and Andreas, R., “Infusion of ‘nanotechnology in health & medicine teaching module into engineering and technology courses.” CAMX Conference, Dallas, TX., October 27-29, 2015.
  17. J. Tate, S. Espinoza, D. Habbit, and A. Alvarez, "Military and National Security Implications", CAMEX 2014 The Composites and Advanced Materials Expo, Orlando, FL, October 13-16, 2014
  18. J. Tate, D. Habbit, A. Alvarez, and S. Espinoza, "Nanotechnology in Health and Medicine", CAMEX 2014 The Composites and Advanced Materials Expo, Orlando, FL, October 13-16, 2014
  19. J. Tate, C. Hanks, D. Fazarro, W. Trybula, S. Dutta, and R. McLean, “NUE: NanoTRA- Texas Regional Alliance to Foster Nanotechnology Environment, Health, and Safety Awareness in Tomorrow’s Engineering and Technology Leaders”, 121st ASEE Annual Conference and Exposition, Indianapolis, IN, June 15-18, 2014.
  20. A. Alvarez, S. Espinoza, and J. Tate,, “Effects of Nanographene Platelets (NGP) and Multiwall Carbon Nanotubes (MWCNT) on the Mechanical Properties of Epoxy Nanocomposites Using Different Dispersion Techniques”, International SAMPE Technical Conference, Oct 14-17, 2013, Wichita, KA
  21. S. Espinoza, A. Akinola, A. Alvarez, and J. Tate, “Tension-tension Fatigue Behavior of Nanosilica Modified Epoxy/Glass Nanocomposites for Wind Turbine Blades”, International SAMPE Technical Conference, Oct 14-17, 2013, Wichita, KA

This poster won first prize amongst all undergraduates, masters and doctoral student participants. http://www.engineering.txstate.edu/news/SAMPE-Sergio.html

http://www.txstate.edu/news/news_releases/news_archive/2013/November-2013/SAMPE112213.html

https://gato-edit.its.txstate.edu/school-of-engineering/News/SAMPE-Sergio.html

  1. J. Tate, A. Alvarez, and S. Espinoza, “Nanotechnology in Health and Medicine”, MAES Symposium 2013, Houston, TX , September 25 - 28, 2013.
  2. J. Tate, S. Espinoza, and A. Alvarez, “Nanotechnology- Military and National Security Implications”, MAES Symposium 2013, Houston, TX , September 25 - 28, 2013.
  3. J. Tate, A. Alvarez, and S. Espinoza, “NSF-NUE Nanotechnology Safety Education”, HSI Research Day, Texas State University - San Marcos, March 20, 2013.
  4. Bandyopadhyay, W. J. Geerts, K. Smith, A. Gregory, C. Moore, D. Palmer), J. S. Tate, and M.J. Sablik, “Plastic deformation of thin ferromagnetic films on nitinol sheet metal”, 53rd Annual Conference on Magnetism and Magnetic Materials, Austin, TX, Nov 10-14, 08.